Water cooled cable , Water cooling cable for EAF, LF
1.Electric arc furnace water cooled cable
The electrode surface is tin plated, corrosion-resistant, and has good conductivity. The end is equipped with a lifting ring for easy on-site installation. The fastening of the rubber hose to the electrode adopts two stainless steel clamps, which are safe and reliable. The outer protective sleeve uses high-quality rubber hose, which is soft and has good bending performance. The soft wire is made of high-strength enameled wire, which is corrosion-resistant and has no surface skin effect.
2.Coaxial water cooled cable
Two channels of water and electricity, coaxial, transmit medium to high frequency currents without surface skin effect, with low leakage inductance, low power loss, high power transmission efficiency, and energy saving.
3.Resistance furnace water cooled cable
The electrode is processed from a whole copper rod; Soft wires are made of enameled wire, and there is no green embroidery produced after long-term use; The outer sheath rubber hose is resistant to high working water pressure and will not crack; The cooling water path is unobstructed and the cooling effect is good; The outer sheath rubber hose has high breakdown voltage resistance, can transmit large currents, and is safe and reliable; Multiple specifications and models for users to choose from.
4.Electric slag furnace water cooled cable
There are various structures for electrodes (flat flange type, bell mouth type, and rotating electrode type), and there are three positions for inlet and outlet (on the side of the electrode, on the flange plane, and on the end face of the electrode); Soft wires are made of enameled wire, and there is no green embroidery produced after long-term use; The outer sheath rubber hose is resistant to high working water pressure and will not crack; The cooling water path is unobstructed and the cooling effect is good; The outer sheath rubber hose has high breakdown voltage resistance, can transmit large currents, and is safe and reliable; Multiple specifications and models for users to choose from.
5.Water cooled cable for mineral furnace
The electrode material is T2 red copper, and the electrode structure can be made according to user requirements, with the surface treated with tin plating; The position of the water inlet and outlet can be determined based on the installation position of the user's equipment. The outer sheath rubber hose is subjected to high-temperature fire protection treatment, suitable for the working environment of the ore heat furnace, transmitting large currents, safe and reliable.
6.Vacuum furnace water cooled cable
One end of the cable electrode is a bell mouth locking nut type, connected to the induction ring in the vacuum furnace, and the other end of the electrode structure is a flat flange type, connected to the capacitor. The outer sheath of the cable has a conical sealing ring to ensure sealing with the vacuum furnace shell. In the water-cooled cable part inside the vacuum furnace, the outer sheath is treated against high temperature, and the cooling water of the water-cooled cable directly enters the induction ring in the vacuum furnace for circulating cooling, Widely used in vacuum sintering furnaces for neodymium iron boron magnetic materials, it can replace imported cables from abroad.
7. Polycrystalline furnace water cooled cable
The water-cooled cable electrode is connected to the coaxial electrode of the induction coil of the polycrystalline silicon purification furnace. The structural form of the water-cooled cable electrode is a 90 ° elbow bell mouth taper locking type, ensuring that there is no twisting force when connecting to the polycrystalline silicon purification furnace, ensuring natural bending, and improving the service life of the water-cooled cable.
8.Single crystal furnace water cooled cable
The non-contact electrode has undergone anti-corrosion treatment on its surface, and the inlet and outlet are sealed with rings and connected with live threads. The soft wire is made of enameled wire (the only one in China), which is rust resistant, soft, and not easy to break. The soft wire is connected to the electrical grade cold extrusion and treated with tin, and the contact effect is very good. The outer protective sleeve used is a special high-quality rubber hose customized from the rubber factory, and the rubber tube and electrode sealing clamp are sealed with red copper clamps, which are connected by special equipment extrusion, Water cooled cables have a small bending radius and long service life.
9.Medium frequency furnace water cooled cable
Soft wires use enameled wires, which have no surface skin effect when transmitting medium frequency current, high energy transmission efficiency, low heat generation, and the outer sheath rubber hose is not prone to aging; After softening treatment, the stress at the connection between the enameled wire and the electrode is low. When repeatedly tilting or reversing the furnace, the connection between the water-cooled cable electrode and the soft wire will not break.
10.Hollow water cooled cable
The water-cooled hollow cable soft wire is a type of hollow water-cooled cable processed using tinned copper stranded wire on a specialized weaving machine. The cable is soft, with a small bending radius and a large effective cross-section. Water cooled hollow cable is a new type of special cable that can meet the needs of high current and long-term operation.
